Ai Refurbished -35C to 99C 48L Capacity Recirculating Chiller 220V 1Ph

Description

THIS IS A REFURBISHED UNIT, TO BE USED WITH ETHANOL (COOLING MODE) OR DISTILLED WATER (HEATING MODE) ONLY.
All refurbished units are fully tested at Ai before leaving our facilities and come with 3-MONTH warranty.
Ai C40 series recirculating chillers are the true thermostatic control laboratory chiller, they allow you to remove or add temperature as required by your application. This closed laboratory chiller is ideal for applications such as cooling
rotary evaporators,
analytical instrumentation
, laser etching, ICP, vacuum systems, plasma etching
and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.
Ai C40 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use.
Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.
C40 circulating chiller features
No dry ice or liquid nitrogen needed
Wide temperature range from -30°F to 210°F
Secondary over temp protection
Advanced PID digital temp controller
All steel construction for durability
Cost saving as the water consumption is completely eliminated
Built-in casters for mobility
Plug and play, no assembly required
Specifications
Model
C40-48-220
Electrical requirements
220V 60Hz 1-PH 17A, 3200 watts
Capacity
48 liters or 12.7 gallons
Compressor
Make: Tecumseh Model AWA AWA2460ZXD (USA)
Power: 208-230V 60Hz or 200V 50Hz, 2 HP
Number of compressor: One
Refrigerant type: R410A
Refrigerant capacity: 2.5 Lbs
Cooling capacity: 6300 BTU / 1588 Kcal/h / 1846W
Radiator
220V 50/60Hz 1-PH 200 watts
Recirculating pump
Make:
Wilo (Germany) PM-052PM
Output: 50 watts
Pumping speed: 10.6 gallon/min or 40L/min
Maximum head: 18 feet or 5.5 meters
Reservoir
Dimensions: 23.6 x 15.7 x 7.8" (WxDxH)
Material: Type 304 stainless steel,
polished
Chilling fluid connection: 3/8" hose barb x 2
Temperature controller
Range:
-30°F to
210°F
Type: Digital microprocessor PID controlled
Display unit: °F
Timer range: 0 to 99 hours 59 minutes
Step: 0.1°F
Oil separator
Make: North Peak (NS-1003)
Connection: 3/8" ODS
For refrigerant: R134a/R22/R404A/R407C/R507/R410A
Working pressure: 500 PSIG
Housing
Powder coated type 42 stainless steel
Heater material
Stainless steel
Coolant
Ambient to -35C:
Ethanol
Ambient to 99C: Distilled water
Built-in swivel casters
Four
Unit dimensions
28 x 24 x 38 (WxDxH)
Unit weight
190 lbs
Safety
Over-temp protection
Secondary over-temp dial protection
Compressor over-load protection
Controller lock
CE compliant
Yes
Recommended for rotary evaporators
10L rotary evaporators