Fast Drying Concrete Stain-Professional-Easy to Use Sample Pack 16 4oz Bottles

Description

Ten Second Color (TSC)  are
penetrating dyes to color concrete and other cementitious surfaces.  When properly applied, they create beautifully mottled effects similar to acid stain in a matter of seconds without the wait time required by acid, saving you time and money.  TSC and AE are translucent dyes, and colors can be combined into countless variations and hues, or layered for unique effects.
You Must Add Acetone
Simply fill the remainder of the container with acetone (4 ounces) and go!  For interior and exterior use.
Sample kit contains trial sized (4oz) bottles, one of each TSC Color - 16 in all.
Application Instructions:
Step 1:
Concrete must be very clean, dry and porous. (Water must readily soak in and concrete should feel similar to 120 grit sandpaper.)
Step 2:
Apply Dye with a cone tip pump sprayer that is compatible with acetone. TSC Dye can also be applied with a brush, roller or HVLP spray equipment.
Step 3:
Allow to dry completely and apply sealer.
TSC™ Dye samples shown are representative of Ten Second color applied to standard, gray concrete using the directions provided on the Technical Data Sheet. Results may vary depending on the condition, age and makeup of the concrete, and/or the application methods used. Always test prior to use.